Key points
- There is no fixed number of days: it depends on how much is affected, what materials are involved and whether the area is still wet.
- Every job runs the same stages: inspection, containment, removal and cleaning, drying, then clearance.
- The job is finished when clearance passes — not on a set date.
- Our AMRT-certified crew does the work; air samples are analyzed by Sporecyte, an outside lab.
What decides the timeline
- Size of the affected area. One closet wall is a different job from a whole basement.
- Materials. Hard surfaces like framing can usually be cleaned; drywall, insulation and carpet with growth are usually removed.
- Is it still wet? Mold comes back if the moisture source isn’t fixed and the area dried. If there was a leak, drying is part of the job — see structural drying.
- Access. Attics, crawlspaces and HVAC ducts take longer to set up and clean.
The stages of a remediation job
- Inspection. Find the growth and the moisture behind it. See mold inspection cost.
- Containment. The work area is sealed with plastic and a zipper entry, with HEPA negative air so spores don’t spread to the rest of the home. See negative air containment.
- Removal and cleaning. Affected porous materials come out; framing and other hard surfaces are HEPA-vacuumed and cleaned.
- Drying. Any wet materials are dried and checked with moisture meters.
- Clearance. Our crew checks the area and air samples go to Sporecyte. See post-remediation clearance.
- Repairs. Drywall, insulation and finishes go back after clearance.
What to expect while it runs
Containment stays up until clearance, and the equipment runs around the clock. Whether you can stay in the home depends on where the mold is — see can I stay home during mold remediation. For the full picture of a job, read what to expect during mold remediation.
Every remediation carries a 90-day mold warranty from clearance: if it comes back, we reinspect within 7 business days and re-remediate free.
Common questions
Why can’t the drywall go back right away?
Because the area has to pass clearance first. Closing up a wall before clearance would hide any growth that was missed. Repairs start once clearance passes.
What usually slows a mold job down?
Growth found behind a wall once it is opened, materials that are still wet and need drying, and waiting on insurance approval when there is a claim.
Does the lab add time?
Yes. Clearance air samples are analyzed by Sporecyte, an outside lab, so the job is signed off when results come back, not the moment the cleaning is done.
Get a remediation estimate
Call (385) 250-2825 — answered live 24/7 by the Vault crew.